Technical Details
- Advised by MultiECUScan / FiatECUScan diagnostic software
- Compatible with ELM327 or KKL (VAG COM)
- 6 x 16 Pin OBD Cable Adapters
- See MultiECUScan / FiatEcuScan website for a full list of supported vehicles
Product Description
Introduction:
Six OBD cable adapters to allow additional diagnostic options for Italian cars. These include ENGINE, ABS, POWER STEERING and CAN ECU's.
Specification:
Green Adapter Lead (MultiECUScan / FiatEcuScan Adapter 1) = Engine, ABS, Power Steering, (usually)
Red Adapter Lead (MultiECUScan / FiatEcuScan Adapter 2) = Airbag, (usually)
Yellow Adapter Lead (MultiECUScan / FiatEcuScan Adapter 3) = CAN, (usually)
Purple Adapter Lead (MultiECUScan / FiatEcuScan Adapter 4) =Hood & newer models, (usually)
Blue Adapter Lead (MultiECUScan / FiatEcuScan Adapter 5) = Newer models, (usually)
Grey Adapter Lead (MultiECUScan / FiatEcuScan Adapter 6) = Newer models, (usually)
Pin Configurations:
Green Adapter Lead = Female pin 7 to male pins 1,7,9,12.
Red Adapter Lead = Female pin 7 to male pin 3
Yellow Adapter Lead = Female pin 6 to male pin 1 / Female pin 14 to male pin 9 / Female pin 7 to male pin 12
Purple Adapter Lead = Female pin 7 to male pins 7,8,11,13
Blue Adapter Lead = Female pin 6 to male pin 3 / Female pin 14 to male pin 11
Grey Adapter Lead = Female pin 6 to male pin 12 / Female pin 14 to male pin 13
Additional Items Required:
An ELM327 or KKL (VAG COM) diagnostic cable to connect to these adapters.
MultiECUScan / FiatEcuScan software (free or full version).
Supported Vehicles:
Please see the MultiECUScan / FiatEcuScan website for a full list of supported vehicles.
Other Details:
Cables fully tested on supported model before shipping.
No responsibility can be accepted for any damage caused by the lead.
Some models may require the full version of MultiECUScan / FiatEcuScan to communicate with some ECUs.
